How Often Should You Change your HVAC Filter?

Every HVAC system needs a filter change for it to function properly. Whenever filters are clogged and dusty, the aftermath is a strained AC and compromised air quality. The impact is so severe that the entire HVAC unit can break down in some cases. With these serious implications in mind, knowing how often one should replace their HVAC filter is crucial. While most manufacturers and HVAC professionals/ technicians recommend an average of 90 days or three months for filter changes, the frequency may vary depending on specific situations. You may have to change filters sooner depending on different scenarios.

If You Have Pets

While the general rule is to wait for 90 days before changing your HVAC system’s filter, this may not be viable in cases where homeowners have pets. The pet dander and fur tend to clog the filters faster and will cause airflow obstruction. Consequently, you may have to replace the filters sooner. Most homeowners with pets change their filters after 60 days. This duration may even be shorter if you have multiple pets and may require changing the filters after 20 to 45 days. Doing so ensures proper air circulation, which helps your AC function better and prevents any respiratory infections resulting from compromised air quality.

 Vacation Homes

Just as there is an average of 90 days for regular homes and fewer days for homes with pets, you may also want to know how often you need to change the filters of your vacation home. Filter changes, in this case, will be fewer than usual. Since the space is only used occasionally, you can change the filters every 9 to 12 months. Bear in mind that the more you use your vacation home, the more frequent the AC filter will need to be changed.

What Happens When You Forget to Change the Filter?

One may wonder why all this much emphasis on filter changes? Simply put, your home’s quality of air can become compromised. An HVAC system filter is designed to protect the internal components of the HVAC system. Most of these components are delicate and easy to damage. Letting all sorts of debris and dirt into your unit can reduce your HVAC unit’s lifespan, not to mention the constant repairs you may have to endure.

Depending on your system, you may have to clean the filters or replace them as they get clogged. Failing to do this lets in contaminants and dust that compromise the efficacy of your AC, thus hindering its performance. With increased airflow restriction, the unit strains more, leading to inefficiency of energy consumption, constant repairs of the AC unit, and eventually may trigger the unit’s failure if the problem persists and is ignored.

Make sure to monitor the air filters in your AC closely. Set reminders if you have to, but always replace dirty filters or clean them if that is what your system requires.

All you need to know about Air Conditioning Maintenance Provider

Air Conditioning is something that everyone needs when the weather outside gets too hot. The summer weather can be very hot and people are literally drenched in sweat from the exposure to the heat. Air Conditioning can alleviate this uncomfortable situation, but it is vital to make sure that you have an air conditioner installed in your home.

But how does an air conditioning system work?

And more importantly, what are the important steps to take to ensure that you have an efficient system installed in your home? Well, a dependable air conditioning system comes from working with an excellent air conditioning service provider. But what makes a great air conditioning service provider great?

Like all businesses, there are a number of different things that you need to look for when choosing one to help with your Air Conditioning needs. First and foremost are the availability of experienced and qualified staff.

Some Air Conditioning Repair Service Providers will boast the numbers of installations they have done under their belt, but you won’t get that many details from them about their training and qualifications. Check out their references and read up on them carefully, so that you know who you are dealing with. This way you can be confident that they will be able to do a good job for you.

When choosing an Air Conditioning service provider, another thing to check out is their range of services. Many times it can be difficult to tell if they have any special offers or deals set up, as well as their standard maintenance plan. But by taking the time to check out their range of services and offers, you can help to ensure that you get the best value for money that you can.

You will need to ask your Air Conditioning service provider like Air Conditioning Eastern Suburbs how frequently they conduct routine maintenance checks on your air conditioning system. Often, a great service provider will offer a minimum of an annual cleaning of the system, as well as other regular services such as testing your heating and air conditioning units.

If you want to reduce your costs, you may also want to consider conducting these services yourself, so that you know that the units are being maintained well. Regular maintenance checks help to keep your central heating or cooling system working at its very best, preventing it from breaking down and costing you unnecessary money.

In addition to regular Air Conditioning Maintenance check-ups, there are certain times during which an Air Conditioning system should be checked and serviced in order to keep it working at its best. Cold weather, for example, is a great time to carry out some maintenance work on your HVAC system; this will ensure that it is working well and that your home is as warm and comfortable as it can be. If you find that your thermostat requires repair, take the time to find your Air Conditioning maintenance provider and get them to carry out the repairs quickly and efficiently to ensure that you save money on the cost of repairs in the future.

The Green Trends For 2018 In The HVAC Industry

One of the most important things when it comes to having a comfortable and eco-friendly home, is to properly set up the HVAC system. The HVAC industry was once very energy inefficient but it has become increasingly green and eco-friendly over the years. As a result, the industry has become more sustainable and environmentally friendly and continues to trend in this direction.

During the summer months, the usage of air conditioners actually account for almost 50% of the electricity bill. As you can see, this is quite high and the HVAC industry has always been looking for ways to reduce this percentage. In this article, we will take a closer look at the green trends for 2018 in the HVAC industry that can not only lower your bill but have a more positive impact on the environment.

Increased Automation

In 2018, there is more automation in the HVAC industry than ever before. There are now programmable thermostats that keep constant track of the temperature and movement so that cooling and heating is more efficient. By automating temperature tracking, the HVAC system is able to be more efficient at its job, which automatically reduces how much energy it uses. There is also greater investment into the automation of installing HVAC systems in both residential and commercial places.

The building automation systems (BAS), have microprocessors that keep track of all the environmental changes in each room. These automation systems not only keeps track of and controls temperature but also light and indoor air quality. As a result, this system is not only perfect for the home, but also in commercial labs, isolation rooms, pressurized spaces as well as operation rooms.

Green Buildings

There have been many studies that show that green buildings actually cost 14% less to run than standard buildings without green technology. As a result, the demand for green buildings has increased and is expected to double every three years. One of the biggest components of creating a green building is installing VRF (variable refrigerant flow) systems. When these systems are installed, they reduce the building’s power consumption, have a lower installation cost, are more flexible in their design and are cheaper to maintain, when compared to the chilled water system that is traditionally used.

Another design that recently won an award is one that uses seawater which is pumped into the rooftop of the building so that it sends cooled air into the building. This cool air is distributed throughout the building without the need for mechanical fans and the building’s chillers move the heat into the seawater. This design is significantly more efficient that typical towers that are used since they save a great deal of energy and reduce overall operational costs.

Hot Water Recirculators That Are On Command

One of the largest sources of energy consumption in most homes is the use of hot water. Heating water requires a great amount of electrical energy and it also takes time for the heated water to reach the tap. So, one of the solutions that has been recently created is on command hot water recirculators.

There is a particular on command pump that needs to be attached to hot and cold water pipes that are in the kitchen and bathroom areas of the home. The on command pump basically allows you to have hot water, 24/7 anytime you need it. This is possible because the cold water is recirculated back to the water heater via the cold water pipe. Even though this is not a completely perfect solution, the use of these recirculators are significantly more energy efficient as well as convenient.

Better Use Of Software For Big & Small Data

Software is now an integral part of HVAC systems since it is used to do data analysis and keep track of each system’s need for maintenance and repair. There are IoT sensors in each system that keep track of each HVAC unit condition as well as how much it is used etc. This data is then compiled so that trends can be identified and the overall product can be improved.

Ductless Mini Split Systems

Ductless Mini Split Systems are now being used by people who live in places where there isn’t standard air conditioning systems. These ductless systems are extremely easy to set up since they allow you to get cooling and heating without much construction. These systems save you time, money as well as raw materials and are the perfect green machines that can be used anywhere since they don’t require ducting. You don’t have to sacrifice any comfort and as the technology advances, the prices reduce.

Greater Regulations

There are now many more refrigerant regulations in 2018 that are filed under the Environmental Agency Clean Air Act. For example, only technicians that have EPA certification can sell HFO and HFC refrigerants. The proof of certification must be kept by the employer, as much as 3 years after the employee has left the employer.

Next, HVAC technicians must stick to the refrigerant record keeping laws which applies to appliances that hold between 5 and 50 pounds of refrigerant. When a technician is recovering the refrigerant, they must take a record of the location, date, type and amount of refrigerant that is disposed of. In the event that the technician is transferring it for reclamation or destruction, they must also take the same records as well as the name of the person they hand it off to.

There are also certain rules that apply when servicing HVAC equipment with HCFC and CFC refrigerants that are also applied to equipment that have HFC and HFO refrigerants.

Certification cards that are issued or need to be replaced in 2018, now have new wording. These cards will now include the technician’s name as well as the specific EPA certification that they have.

In closing, we have just looked at a few of the green trends for 2018 in the HVAC industry. There is no doubt that this industry will keep on growing and evolving and will only become more energy efficient and eco-friendly with time.

How Often Should You Clean Your AC Coils?

The coils in your air conditioner are all too often overlooked when it comes to ensuring the proper operation of your cooling unit. But the coils are instrumental for the transfer of heat out of your home and cool air coming into it.

When your coils are covered in dust, dirt, and other detritus, that air transfer can’t be accomplished effectively and that can lead to some serious problems both in the excessive use of your air conditioning system and your energy costs.

Dirty coils are going to force the unit to work harder over a longer period of time in order to reach the desired temperature level in your home. When your unit has to operate for longer than normal, that will increase your utility bills and could put undue stress on your cooling system.

But make no mistake about it, cleaning your AC coils is absolutely imperative for increased efficiency and a cooler home in less time. Allowing them to get covered in too much gunk and grime is just asking for your air conditioner to break down.

Trust me, the last thing you want is to go without AC in the dead of summer. It’s a dirty job, but somebody has to do it. It’s been proven that air conditioners with clean coils 30 percent more efficiently than air conditioners that have to work harder and longer just to reach their desired indoor temperature.

Even more beneficial is the fact that air conditioners that operate with clean coils more often are less likely to break down, saving you even more money in repair costs and replacement expenses. Simply put, a little time and effort on your part can amount to big bucks in your pocket on annual basis.

They say time is money, but when you clean your AC coils on a regular basis, that is literally the case!

So read ahead and see how you can keep more money in your wallet and still have a comfortable, cool summer by just giving your evaporator and condenser coils a little bit of tender loving care.

Cleaning Your Coils Regularly

So then, how often should you be cleaning your air conditioner coils? For most of us, it’s a job you need to do only once a year. That isn’t a lot to ask to ensure that your ac cleveland is properly maintained and operating at peak performance.

However, this time frame can be altered just a bit depending on the part of the country in which you reside. If your home is located in a region that gets an abundance of wind and dust or dirt is swirling through the air on a routine basis, then you may need to clean your coils a little more often.

Extended heat temperatures can also play a role in how often you need to clean your coils. For those of you who use their air conditioning more routinely throughout the year, it’s a good idea to check the coils every few months. This is particularly true for older units that have seen years of faithful service and may be less resilient than they once were.

These older models may accumulate dust and debris more easily than the newer models so be sure to give the coils an examination periodically, so as not to tax an older unit more than it needs to be. This can shorten the life of the unit considerably and, before you know it, you’ll be shelling out big bucks to replace it entirely. All because you neglected to clean out the coils.

How To Clean Your Coils

The first thing to remember is that you can easily damage the coils if you’re not careful with them. That can make thorough cleaning a challenge, but as long as you bring a deft hand to the task, you can be sure your air conditioner will operate nice and smoothly.

Some homeowners prefer to have the job done professionally by a trained contractor who can come out once a year to diagnose any problems and fix issues before they become a headache. During that routine checkup, the coils are usually given some attention so as to clear away and debris such as leaves, grass, or any other elements that can get caught inside.

But if you would rather not pay someone else to do a job you can easily accomplish on your own, then simply grab a hose and gently spray the coils clean, taking care not to turn the water on too hard. Even a splash of water can damage the delicate coils in your AC unit.

When you get a look at your cooling costs and home heating bills, you’ll be glad you took the time to clean your coils and you won’t need to do it again until next year.

How R-410a Became The Most Efficient And Environmentally Friendly HVAC Coolant

Air conditioners and heat pumps basically work almost exactly the same, only heat pumps can work both ways, or in reverse, so that they can either heat your home or cool it. What they do, in the simplest explanation, is absorb heat from one area using a refrigerant, then pump the refrigerant to the other half of the unit to dissipate that heat. Of course, it’s a lot more complicated than that, using fans, compressors, coils, and valves, but you get the general idea. The chemicals that have been used over the years worked quite well at absorbing heat on one end and dissipating on the other end, however, the original chemicals had many problems and each replacement had others. Researchers have struggled to find an inexpensive, non-hazardous replacement for years and have tried several. Here is the latest and most efficient coolant information for your HVAC unit.

The Original Coolants Were All Toxic

Once scientists figured out how the mechanics of a cooling system were going work, the search was on for a good chemical that would absorb heat really well, release it just the same, and not wear out the piping, compressors, valves, and radiators.

Ammonia was used for a few decades, it wasn’t very efficient, but it was incredibly cheap to use. The problem was if there were any kind of leak, the whole building would have to be evacuated. This gave air conditioners and refrigerators a bad reputation that was hard to combat. Methyl chloride was also used as was propane, the combustible fuel for stoves, they were toxic and flammable so still, evacuations were necessary, and explosions sometimes were caused when the coolants came in contact with any kind of flame.

Finally, Freon was invented, it was not toxic to breathe, and it didn’t burn either. It was called a chlorofluorocarbon or CFC gas. While it had chlorine and fluorine in its chemical structure, they were both tied up in long chains with carbon atoms keeping them from being their toxic selves. There were then several different types of Freons developed starting with Freon R-11 and then Freon R-12 each with a slightly different chemical structure. Some were more expensive while others more efficient, but they were all good at their jobs.

Then it became known that these CFC gases were destroying the ozone layer high above in the atmosphere and very rapidly at that. The ozone layer is what protects most living things on earth from being struck constantly while outside by harmful radiation from the sun. Without the ozone layer, which at one time had retreated to a tiny fraction of normal, humans and other creatures would get a lot more cancer. In addition to that, it was discovered that the CFCs were a lot stronger greenhouse gas than either CO2 or methane.

Then R-22 Came On The Market

R-22 was far, far better when it came to ozone depletion and after the switch from the other CFCs the ozone layer began to grow back, slowly but surely. So the older CFCs were banned and all new products could only be made with the newer, better, R-22.

In most cases, the more advanced countries got together and signed treaties to stop using the older refrigerants and could only use recovered refrigerant to replenish the older HVAC units and refrigeration units. The poorer countries, on the other hand, could continue to use the ozone depleting and greenhouse gas causing older coolants until there was a cheaper replacement.

As time went on, the R-22 became the dominant coolant worldwide, even though it still caused some ozone depletion and was a potent greenhouse gas. R-22 is 1800 times more potent of a greenhouse gas than Carbon Dioxide, that’s an alarming statistic.  Most of the poorer countries began manufacturing their own, such as China and India so the price dropped and became more affordable.

The problem was, because of the huge increase in growth of air conditioning and refrigeration in the poorer countries, there became an increasing release of the gas into the atmosphere causing some of the same problems as the older CFCs that were in use previously. So, again, the modern countries of Europe and North America got together and banned all new manufacturing of R-22 and regulated the capture and reuse of the refrigerant only for repair of older units. This came to pass in the year 2010  and was named the Montreal Protocol after the city where the agreement was reached.

Now The Best, Most Efficient, And Safest For The Ozone Layer Is R-410a

Since R-22 has been regulated out of use in Europe and North America a new coolant called R-410a has become prominent. It has been advertised as not contributing to the depletion of the ozone layer at all, so no more worries there after all the older appliances work their way out of the market. It does, however, still cause huge greenhouse gas problems so it’s illegal to release it into the air purposely, it can only be reclaimed by licensed technicians that have the training and equipment to do so. It will still leak into the atmosphere on occasion when appliances break down with bad compressor seals or leaks in their piping.

Since R-410a from bluon energy is much more efficient than R-22 it is believed that the reduced amount of power used will compensate equally with the amount of greenhouse gas problems created. In other words, they’ll break even on greenhouse gases while saving the ozone layer at the same time. R-410a is now the number one refrigerant coolant used in all of North America, Europe, Japan, and most other modern countries on earth.

It can’t be substituted into older appliances since it needs higher pressure values to operate and the older machines can’t be retrofitted. In addition to that, because of the higher pressures involved the technicians have to be specially trained and have special tools in order to work on R-410a appliances.

At this point, unless some new problem is found with this new coolant, all new HVAC units and refrigeration units will be using it from here on going forward. The brand name of this coolant is Puron and it is considered a long-term environmentally safe solution that won’t have to be changed in the future like all of the coolants of the past.

Tips To Buy Or Hire Outdoor Heater

Many people simply prefer to spend most of their time on their patio. However, with the onset of winters, they can’t stay outside in the cold for long. Just because the days become shorter and temperatures fall at night there’s no reason to go inside your home and sleep. You can remain outside longer by installing at least one or more patio heaters around seating, recreation and amusement areas. The wide range of tabletop, stand alone, and wall mounted heating models available clearly implies that you can choose at least one that will certainly satisfy your needs. Tips To Buy Or Hire Outdoor Heater Choosing right heaters depends on analysing the areas to be heated with warm sources and warming devices. The main question to answer is the exact source of the warmth. If electrical power is accessible, the appropriate thing to do is buy halogen or infrared electric heaters. Natural gas heaters are utilised where there’s no availability of electricity. Secondly, it becomes an important question to figure out where the warmers ought to be put and the designs that are most satisfying to you. Check out some of the numerous choices available, and then choose the one that suits your requirements. As far as the area to be warmed, models are intended to give warmth to park tables as far as possible up to patios, gazebos, pool decks, and lawns. No matter what’s the size of the area that needs to be warmed, there is a wide availability of styles that enable you to define your own taste and creativity. Numerous table top heaters, for instance, come in designs of table lights. Or, then again, you can choose models that are in designs of floor lights to put near the seating arrangements. These two styles offer the additional benefit of being portable heaters, allowing you a chance to move them wherever required. Furthermore, as a vital safety feature, they consequently switch off if tipped or overturned. As the area that’s meant to be warmed increases in size, so develop your options with heaters. You can place these heating devices at key areas on your yard or lawn. An especially captivating design is a flame patio heaters pyramid that comes with a clear flame and it delivers warmth in every direction in a large area. Such heaters encourage your guests and family members to spread out and move all over the place during parties, picnics, receptions and other events. Gas heater is an excellent choice to direct heat directly into the gazebos, open or enclosed porches, and other similar areas. This type of heater has the additional benefit of not consuming up floor space as they can placed in different locations and still heat is distributed all over the place.

Gas Heater Is The Best Choice To Keep Your Home Warm!

Natural gas heating devices can be an awesome thing for your family house if you live in colder areas where winter temperature can dive below the freezing point, or even if the summer evenings are chilly, which doesn’t allow you to spend time on your patio. These heating devices are switched on to usually get help from chilly evenings. Natural gas heating devices are generally favoured over different types of heaters since they use gas as fuel, which is a cleaner and energy-efficient source of energy. Different types of heat energy are to cause pollution or leave residual waste, which can be hard to oversee. Gas heating devices are for the most part utilised for warming living areas and furthermore at work places on account of the cost factors and furthermore for its productivity. Gas is far more affordable and more easily accessible, particularly in homes due to which it ends up plainly helpful to utilise heating device that runs on gas. They are additionally favoured due to different factors, for example, simple using options and safety reasons. These gas heating devices are simple to install, maintain and endures longer than different sorts of home radiators. They can even be utilised outdoors on your patio, or you can get a portable model that can be taken for a camping or trekking night amid summers and winters. Heating devices that use gas as a fuel come in many shapes and sizes and are likewise accessible in portable models as mentioned above. Heaters that utilise gas are additionally used as wall radiators, patio heaters and to warm small rooms particularly the portable ones. Trustworthy brands offer a longer guarantee period and convey better performance when compared with assembled or unbranded heating units. As we all know that maintenance is the lifeline of every device, and gas heater is no different than others. In any case, sometimes there is no compelling reason to bring in specialists for upkeep. It can be done by homeowners themselves. However, this only incorporates basic cleaning and not anything technical. Qualified and skilled professionals should be hired for true maintenance and to resolve any problems. There are a couple of things that must be firmly considered when you purchase patio gas heaters. The place, room or patio that you have to warm up will be the prime factor in choosing the sort of heater you should purchase. At the point when installed effectively in the correct area, they can give the best warmth at a reasonable cost compared to other heating machines. Gas supply that is utilised in the kitchen can be used for these heating devices as well. You can consult with your gas fuel provider for insights about expenses and installation factors. However, you should hire professionals to refill the fuel in your heater for safety reasons.

Tips For Preventing Accidents With Heaters

The most widely recognised kind of heater utilised by homeowners generally uses gas as a fuel. This type of heater is the most efficient and has the power to keep even the patios warm. However, you need to be extra careful while using any type of heater in your home. Here are some safety rules for your heater in your patio or home. Buy A Renowned Brand Of Heater A heater is a necessity in every home, particularly in the winter. It is one of the best investments that you can make to ensure the comfort and welfare of your family. Purchase a renowned brand of heater to guarantee that you get a high quality of warmth. Ask from your friends, colleagues, and relatives about dependable heating devices that have been in the business for a long while. Try not to buy a heating device that has not been endorsed by renowned testing organisations. If the heating device has no proper certification for its quality, don’t consider getting it. Safety is the first and foremost thing that you must consider when it comes to buying heating devices for your home or patio. See If The Installation Is Done Properly You need to make sure that your patio heating device that runs on gas, is installed properly in order to prevent any short circuits, or fuel leakage. This can be effectively ensured with the assistance of a qualified repairman who knows how to take care of such devices. Clean The Filter Of Your Heater Regularly The filter of the heating device guarantees that only fresh & clean air comes out and it prevents any dirt or dust from getting inhaled by your guests. To ensure that the limit of your heating device is boosted, you should frequently clean its air filter at regular intervals, and get a new filter whenever required. Have Maintenance Work At Regular Intervals Just like any other machines, gas heater, particularly those that are utilised quite often, require yearly maintenance work to check for any issues or hardware problems. This will keep you safe from any danger that a malfunctioning device can cause. Once more, an experienced repairman should do this check up and maintenance works. Keep Up Cleanliness Around The Heater The area around your heating device needs to be cleaned to prevent any potential mishaps that can easily occur, if a place is messy or cluttered. Keep Flammable Things Away From The Heater Combustible solids and fluids could put your home and family in danger as they will increase the threat of fire. A gas heater can be extremely sensitive to combustible materials, so never keep these things to near it. The best way is to keep the heating device in such a place where no such things are kept, or it stays away from the reach of pets and children.

Fundamental Air Conditioner Repair And Maintenance Ideas

These days, even residential complexes have this unit to maintain a healthy ambiance at their desired place. With the regular and frequent utilization of this unit, it takes toll in their internal equipment parts needing Tucson air conditioner repair and maintenance. It is one of the best ways to keep the unit efficient and also working in the best way possible when you need it badly. Hence, it becomes a compulsory thing for the owner of the unit to carry out regular and periodic maintenance which enhances its longevity and assist in offering efficient cooling. Nonetheless, as a mechanical machine is liable to depreciation at least once in a year and it requires proper maintenance and repair of air conditioner in Tucson. Here are some of the common issues which arise due to skipping of regular maintenance and must be included in the maintenance program for the best cooling and maintaining healthy ambiance at your commercial or residential place. Maintenance of the air filter: One of the very first things that one should carry out is the purpose of keeping the air conditioning unit efficient. Ideally, an air filter should be inspected once in a month and according to the condition of the filter it should be replaced or cleaned. If the air filter is not replaced or cleaned, it may cause various issues and make you pay a huge amount of money for air conditioning repair service Tucson. Untidy filter blocks the flow of air making it harder for the unit to offer efficient cooling.

Cooling with flaws: There is another common issue that people face, when they are not able to regularly maintain the air conditioner. In most situations, it happens of the compressor is not running despite the unit fan is running. The first important thing you should check is the wire of the compressor as it might get shorted or burnt. It may be also due to the possibility of overloading of the protector or might have a defective capacitor. To stay away from this issue, it is always better to call a service provider for heating repair Tucson who has all the experience and required tools to solve this issue. Maintenance of the compressor: This is also known as an exterior unit as it is located beyond the building. If you are getting an efficient cooling from the air conditioner, then it is better to check the unit. This unit usually gets affected by the external factors such as heat, rain and the leaves. Hence, it is suggested that if you are not utilizing the air conditioning unit in winter, then you should cover the compressor of your unit with a cloth piece so that it will not get untidy.

Find Easiest Way to Clean Split Air Conditioners

What Are Split Air Conditioners? A split air conditioner is a portable type of air conditioning system, one of which that comes with two units- one installed indoors and the other outdoors. The two units mentioned above each play a role to enhance the working of the air conditioner. The unit installed indoors is composed of an air filter, a cooling coil and a blower fan whereas the unit outdoors is composed of an expanding coil, a condensing coil, and a compressor. With these mentioned, proper maintenance of these units is highly required. Reasons to Clean Split Air Conditioners Since a split air conditioner is made up of two separate units, they all need to be checked on a regular basis. Some items that could result in a low performance of a split air conditioner and this could cause further unwanted problems including

The circulation of air with low quality due to dust and build-up of harmful bacteria. Low efficiency of the unit which means high energy usage and increased cash spent on payments of electricity bills. Decreased Lifespan of the conditioning unit and the need to replace it often. Tools Needed to Clean A Split Air Conditioner A screwdriver A duster A clean cloth Coil Treatment solution Fan treatment solution Pressure cleaner Anti-microbe Treatment solution Water How to Clean A Split Air Conditioner There are very easy steps to save you time when Air Con Split System Cleaning. They are listed below. Step 1: Turn off the conditioner and disconnect from the power source. Step 2: Use a screwdriver to loosen the front cover of the conditioner to expose the coil. Step 3: Use a clean duster to gently remove dirt from the coil Step 4: A generous amount of coil treatment solution is sprayed to further remove dirt and microbial build-up. Step 5: Expose the blower area and use the fan treatment solution on it so that it is left thoroughly clean. Step 6: Use the pressure cleaner on the evaporator coil and the fan area. Step 7: Prevent future microbe growth by using the anti-microbe treatment solution to spray the filter. Step 8: Using a clean cloth and water, gently wipe the cover of the conditioner. Step 9: Couple back any removed pieces and test to ensure that they work efficiently. Portable Conditioning Cleaning is a very easy task to perform in a moderate amount of time. The materials required can be purchased from different stores as well as online. You could also make use of conditioning cleaning services to ensure that the steps are adequately followed to produce better results.