Can you buff scratches out of a wooden floor?

Wooden floors are more practical than carpet, but that doesn’t mean that they don’t occasionally suffer from knocks and bumps that affect their surface. It’s actually very easy to remove minor scratches with minimal fuss, but how you treat minor surface blemishes very much depends upon the type of wooden flooring that you have.

Sanding your wooden floor

More serious damage can be treated according to the construction of your floor. Real wooden floors can be sanded down with impunity, whereas engineered flooring, which has a real wood veneer, can tolerate sanding up to five times before you run the risk of exposing the underlying ply.

Don’t make the mistake of thinking that laminate is topped by a wood veneer. According to The Guardian, since laminate flooring is actually plastic imprinted with a photo-realistic image of wood, scratches simply cannot be repaired, making it a much less attractive option for a hard-wearing floor.

Repairing deep scratches

It’s impossible to sand out a deep scratch, so this type of damage needs to be filled and then sanded. If you take a look at the huge choice of engineered wooden floors at, you’ll see that they come in a wide range of colours, so you need to find a wood putty that exactly matches the wood for the most invisible repair work.

Apply the wood putty carefully, leave it to set, and use fine-grade sandpaper to bring the repaired area back in line with the rest of the surface. Wipe clean with a damp cloth, allow to dry, and top with a layer of varnish to seal the repair.

Fixing minor scratches

Using wire wool, carefully rub at the scratched area in the direction of the wood’s grain. You may need to gently buff the surrounding area, too, enabling the scratched area to blend into the surrounding wood. Using a wax stick in the same colour as your wood floor, gently rub over the damaged area, leave the wax to dry for a few minutes, and then buff with a soft cloth.

Very minor scratches are unlikely to penetrate the wood, and a gentle rub with a cloth soaked in floor cleaner may be all that is needed. Rinse clean and apply a surface finish for protection.

janitorial supplies
Make Your Roof Last Longer With These 5 Tips

You may not spend a ton of time thinking about your home roof, but it puts in overtime protecting you and your home from exposure to cold and moisture 24/7. Because of this, it only makes sense that you should take the best possible care of your roof to ensure that it stays strong and sturdy through the years. That said, each roof has its own lifespan ranging anywhere from 100 years to 25 years. Having a roof that’s a bit less durable, however, doesn’t mean that you have to shell out for a replacement every 20 years or so. With a bit of organization, you can extend the lifespan of your roof by practicing a few helpful roofing tips. If you haven’t called your local decatur roof repair service yet, here are some pointers to get you going.

1. Do Maintenance

When it comes to home improvement projects, sometimes the most important areas of our homes get the shoddiest treatment. Case in point: Our home roofs, which can suffer neglect after a grueling winter season. Because we’re not always in the habit of checking the roof for damage, we can end up ignoring the signs and symptoms of a more serious problem. However, taking the time each spring and summer to clean, polish, and replace any injured roof parts can make all the difference in terms of boosting longevity and keeping your home standing strong.

2. Check for Post-Storm Damage

Whether you’ve just experienced a wind storm, a hail storm, or a ton of rain, don’t assume that your roof has survived the bad weather unscathed. After a stormy season or a particularly rough night of rain or snow, do a quick check in the morning to make sure your roof isn’t short any shingles or covered over with ice dams.

3. Don’t Ignore Water Damage

Signs of water damage can be tricky to spot at first. However, the moment you see any staining, discoloration, or even odor in your home’s walls and ceiling, it’s time to act. Don’t assume that a small leak is a small problem. Any leak in your home’s walls can end up seriously damaging your roof, possibly to the point of your needing a replacement. If you want to spare yourself the cost and stress of a roof replacement, take care of water damage the moment it happens.

4. Replace All Missing Shingles

A curled, broken, or even loose shingle might not seem like a big deal, but it can create a giant point of vulnerability for your roof. Anytime your roof is missing a shingle or even a part of a shingle, no matter how small, it can end up providing an easy entryway for rainwater and melting ice to filter in and create a big problem for years to come.

5. Check Your Chimney

Your chimney and the area around it might look tough and secure, however, the flashing that keeps your chimney safe from contact with moisture can often end up coming loose after a big storm. Every so often, check your flashing to make sure it doesn’t need tightening or replacing.



Where to Enjoy James Bond Classics

The James Bond series of movies has a passionate following, and appeals to those that love action and adventure. James Bond is a British Secret Service agent, who is assigned missions by his employer. The storyline centres on him overcoming the challenges he encounters to achieve his mission.

The main character is James Bond – Agent 007. The series of films is based on the novels penned by Ian Fleming in 1952. The first film adaption was made in 1962, and since then 26 different films have been produced.

The James Bond role is highly coveted and many famous leads have filled the shoes of Agent 007. The most recent leading man has been Daniel Craig who took the role on from Pierce Brosnan. Daniel Craig has starred in Bond films Casino Royale, Quantam of Solace and Skyfall. Skyfall was released in 2012, and is the highest earning film of the Bond series and also the 15th highest grossing film of all time.

In 2015, the latest Bond film was released – Spectre – which has been popular, but not in comparison to the major hit of Skyfall.

The character of James Bond, is a confident, handsome and authorities secret agent in his late 30s or 40s. He is known for his incredible accuracy with a gun as a marksman, and his ability to fight the villains with or without weapons. He is also a strong sportsman, accomplished at skiing, golf and swimming.

The Bond character will kill when necessary, and as a means to removing the barriers to achieve his goals.

The film always features a stunning ‘Bond girl’ who is both the sidekick and love interest of James Bond. These girls are glamorous and sophisticated. These leading ladies have included Naomie Harris, Halle Berry, Eva Green, Denise Richards and Michelle Yeo.

Daniel Craig will soon return in the next Bond movie. It is being Directed by Danny Boyle and the release date is not yet confirmed but rumoured to be around Nov 2019. The film will be the 25th in the series and is believed to be based on the 1999 book Never Dream of Dying by US author Raymond Benson.

The best part of Bond films is that there are so many to get through – 26 in fact, with number 27 on the way. Find your pick at the free-to-watch website

5 Helpful Tips for Removing Old Windows

Taking out your old windows and putting in new ones might seem like an intimidating project. However, if you’ve got the right tools for the job and a bit of spare time, there’s no reason this chore has to take a lot of time out of your day. Getting your old window out of its frame means stripping down any caulking or weatherstripping and getting set up to prepare windows for placement. You’ll also need to remove your old windows in a way that doesn’t leave you with a huge mess to clean up or a compromised entryway. That’s why it’s so important to do it the right way, especially if you’re replacing an older, inefficient window with a new energy-conserving model. Installing your new windows incorrectly or taking out your old windows in a haphazard way isn’t just dangerous, it could end up costing you a lot of money down the line, especially if you’re trying to heat and cool a larger house. If you’re looking for ways to remove your old windows quickly and safely, here are some tips to try.

1. Get the Right Measurements

Before you even think about removing your current window, you should have your replacement standing by. To get the perfect replacement, you’ll need to measure your current window’s height, width, and depth to make sure you order the right version. There’s no point in doing all the work of removing your old window only to find that you’ve ordered a poorly-sized replacement. To get the right measurements, start measuring in between the jambs, which hold your window in place on either side. Ignoring all extraneous parts like sashes and borders, get your window’s height and width, as well as its depth.

2. Have the Right Tools on Hand

While taking your window out of commission might seem like an easy job, you’ll need a good amount of hardware to get the job done properly. Before you start, make sure you have a small utility knife, a pry bar, a pair of pliers, a hammer, and some caulking, as well as some nails and paint. If you want to remove your old window and install the new one all in one sitting, you’ll want to have your paint primer nearby as well, along with your new jamb, head and side stops, and sashes. First, use your pry bar to get rid of your side stops and any trim that’s on the sides. Don’t worry about doing a clean job, you can level it out later. For now, you want to create the largest possible opening you can to make the job of installing your new window easier.

3. Remove Caulking

If you’ve been weatherstripping your windows for a while, you’ll probably be looking at a fair amount of caulking built up from many seasons ago. Even if you’re really good about stripping down your caulking after the winter is over, you’re still probably looking at a messy interior. This is the time to take your utility knife and pry bar and get all the gunk off to make space for your new window. If you haven’t removed your side stops or casing, now is the time to do so. Once everything is clear, you might want to sand down the sides a little bit, especially if some of the caulking is too stubborn to come off on its own. However, don’t get too overzealous with your sanding. The goal is to make your window fit perfectly with no gaps. If you shave too much off, you could create space for a persistent draft.

4. Take Jamb Out

Windows with sashes will have a long jamb liner included that looks a bit like a flimsy plastic frame. However, this component is sturdier and harder to remove than it looks. Using your pry bar and pliers, edge out the jamb lining with your old window halfway open, propping it up with something sturdy.

5. Remove Your Window

Now that everything else is out of the way, it’s time to remove your window. After your jamb lining and jamb are taken off, your sashes should come off easy in one go. Remember to take a firm hold of the window in both hands, and make sure you can handle the weight by yourself. Don’t make the mistake of hurting your back due to a too-heavy lift. Ask for help if you need it. Hoisting your window up and out, remove it with the help of your pliers and pry bar. Once it’s out, you can start installing the components for your new window.


Un toit solide refait à neuf

De nombreux propriétaires d’immeubles et cadres d’installations ont subi des dépenses imprévues en raison de refaire une toiture. Beaucoup de ces réparations liées à l’infiltration d’eau peuvent être évitées en développant et en suivant un programme d’entretien planifié pour la durée de vie d’un système de toiture. Cependant, même en adhérant rigoureusement à un programme d’entretien rigoureux, la décision de réparer, de récupérer ou de remplacer un système de couverture existant devra être prise à un moment ou à la fin de la durée de vie prévue du toit. De nombreuses questions, telles que l’emplacement, le type de système actuellement en place, le coût, le calendrier de construction, les besoins des occupants et l’utilisation à long et à court terme du bâtiment doivent être traitées dans le cadre de cette décision. Bien qu’il soit possible d’identifier de nombreux problèmes physiques qui affectent la performance du toit en termes généraux, la décision appropriée doit être prise en compte bâtiment par bâtiment.

La première étape à franchir, avant de commencer le processus de refaire une toiture, consiste à estimer la durée de vie restante du toit. Cette estimation est dérivée de facteurs qui comprennent l’infiltration d’eau, l’humidité emprisonnée dans l’isolation sous-jacente, le mouvement global des agrégats sur le toit, le glissement de la membrane bitumineuse ou la fragilisation des membranes monocouche. Un professionnel de la conception peut étudier le système existant et répondre à ces questions pour le propriétaire, ainsi que commenter tout code ou problème technique. Le professionnel de la conception peut également éliminer les hypothèses fausses ou trompeuses, telles que l’attribution erronée de l’infiltration d’eau au système de toiture lorsque l’eau entre réellement dans le bâtiment par les murs extérieurs adjacents.

La réparation d’une membrane de toit existante ou le remplacement de sections ou de parties d’un système de toiture commerciale devient difficile à justifier si la détérioration entraînant la nécessité d’une réparation est due à une exposition à long terme aux éléments ou à l’âge avancé du toit en question. Si la détérioration est importante, l’application d’un revêtement de maintenance résoudra rarement le problème. Le remplacement des bases détériorées peut éliminer une source spécifique d’intrusion d’eau, mais le remplacement extensif de composants isolés sera rarement rentable. En outre, l’interface des nouveaux éléments de réparation avec l’ancienne membrane de toit détériorée est difficile à réaliser avec un niveau de qualité constant.

Si la source d’infiltration de l’eau est identifiée incorrectement, le toit peut être réparé sans raison plusieurs fois pour tenter de trouver l’emplacement de la fuite. Au fur et à mesure que les fuites du toit se poursuivront, plus de finitions intérieures seront endommagées et le coût des réparations de la toiture commerciale augmentera. Si le toit fuit parce que le système existant a vieilli, ce ne sera qu’une question de temps avant que l’ensemble du système doive être remplacé. Dans ces cas, le coût des solutions temporaires peut ne pas être justifiable; l’argent serait mieux dépensé pour récupérer ou remplacer le toit.

The Best Way To Clean Window Blinds And Shades

Even if you do your best to clean, vacuum, and dust around the house at least once a week, you’ve probably noticed that your window blinds can end up getting awfully dirty in a short amount of time. Whether you’ve chosen Venetian blinds that can collect pockets of dust between slats, or are simply dealing with a hard-to-clean design, you’ve probably had a lot of headaches to deal with when trying to keep your blinds and shades clean. However, if you’re desperate for clean blinds, there are a few ways that you can get creative when cleaning your shades and window coverings that won’t leave a dirty, dusty mess. Different blind types and materials require different products and methods, but if you’re already looking at blind installation companies in richmond, you can choose the right option based on maintenance and care. If you need a few tips for keeping your blinds and shades spotless, here are some things to try.

Dust Wipes for Wood

Wood looks elegant and beautiful, especially as a choice for slatted blinds. However, it’s also a huge magnet for dust. Once dust started to gather on your wood blinds, it can be hard to get off. Dust that stays on a wood surface for a long time can even develop a type of sticky texture that makes it harder to remove. That’s why using disposable wipes for wood blinds is a great way to keep buildup to a minimum. Most store-bought wipes are made of safe material, but if you’re not sure, you can always use Murphy’s Soap or another trusted floor wood cleaner and apply a bit of the solution with a microfiber cloth. After dusting, wipe your blinds down thoroughly, being sure to get into the nooks and crannies where dust easily collects. You’ll be left with a sparkling, smooth set of blinds and no hidden pockets of dirt or dust anywhere in sight. To get in even further, use a flexible duster that will be able to bend and get into those hard-to-reach spaces between slats.

Microfiber for Aluminum and Vinyl

Vinyl might be a durable, scratch-proof material, but it’s no match for dust. Once dust and dirt start to settle in blinds made of harder, sturdier material, you might feel compelled to reach for the harshest cleaner you have and go to town with a brillo pad or another abrasive cleaning sponge. But hold it right there: Just because you’re working with a famously durable material doesn’t mean you shouldn’t use a gentle touch when removing dirt or dust patches. Using a vacuum with a small, soft attachment, try vacuuming as much debris as you can before going at your blinds with a liquid solution. After you’ve vacuumed and dusted as much as you can, you might see something left over. That’s the time to pull down your blinds so that they’re as tight as crease-free and possible and wipe over them with a gentle cleaning solution, such as a diluted detergent, dispensed with a spray bottle. After you’ve sprayed, wipe everything down with a gentle cloth made of microfiber or cotton. This will ensure that you don’t get any streakiness or stray bits of paper towel left over.

Mild Detergent for Rollers

Some more high-tech blinds come with roller wheels that propel them up and down while opening and closing. If you clean your blinds without cleaning these, you’re missing a huge aspect of what can contribute to chronically dirty blinds. If you can remove your rollers, do so, and apply a mild soap and water solution to them to clean. Once you’ve dried them off, they’re ready to go back and function at top speed. If you’re dealing with fixed blinds, you’ll have to use a stool or sturdy chair to spray them and wipe them down. No matter what you do, don’t forget to dust and wipe first, so that you’re not trying to pry off clumps of dirt and dust just using your soap solution alone. The more debris you can get off before adding wet cleaner, the better.

Vacuum First, Dust Second

When it comes to dirty blinds, you might be eager to bring out your duster and start going at it. However, this could end up spreading tons of dust particles in the air where they could land somewhere else. If you want to actually clean your blinds instead of re-distributing dust, always vacuum your blinds first with a small, more detail-oriented attachment. After you’ve vacuumed up most of the dust, you can use your duster to get the area totally spotless.


Reinventing Your Courtyards With Professional Landscapers

Great outdoor designs do not always happen, naturally. Although there is no denying the splendor of the natural terrain in some parts of the country, these natural wonders are very rare in occurrence and cannot be moved from their current position to another. Fortunately with the assistance of professional landscape gardeners it is possible to reproduce great outdoor designs and effects for home owners. People who hire professional landscape designers, are able to convert the drab layouts of their courtyard into delightful gardens. Changes such as these can involve just the simple redesign of a patio or be focused on the entire makeover of the outdoors. The final result of a landscape design will undoubtedly be affected by the expertise and skill of the hired landscape designer.

Obviously the decision to choose a company to design a plan for your yard is hardly an easy one. In order to get the best results, individuals will need to carefully access the features and offered services of the various local landscaping companies. One way of putting to rest the doubts a person might have about a company is to seek the review and attention of past clients. People can then ask vital questions such as the client’s experience and overall evaluation of the company. As a general rule, the more professional a company is the more desirable it becomes.

Another area which people will need to address is that of cost. Understandably, people might be inclined to settle for the company offering the least expensive services. Individuals should however avoid reducing too greatly the quality of the expected services for price. Most companies are willing to provide lower rates for individuals who give sufficient reasons too. Such companies can also be trusted to provide the owners of a home with an estimate of the envisaged design after clarified before the start of a project. A number of companies, provide guarantee options on their services for the clients before starting a project. It is also a good idea to stick with companies that are licensed to practice and possess some form of liability insurance. This will provide home owners with improved security and assurance.

It is not difficult to find landscaping companies. With the use of the web, it is possible to acquire a working list of available landscape design companies located close to you. Many companies are also equipped with websites which allow people to review their services and . These can be also used in accessing the strength and quality of the various company options. With a little time and research, it is possible to find a landscaper and finished design that is appreciated by everyone.